|
| The continued development in the
DRYSAN RANGE now offers even greater pH ranges of chemical applications
with the main machine structure in Stainless Steel, allowing a range of
applications in specific hygiene control environments'.
MST DRYSAN
generates a fine ‘DRY’ ultrasonic
particle reaching and disinfecting
ALL
contact surfaces within enclosed control areas ( '*' at a nominal usage rate of
0.5 litres to 5 litres of disinfectant concentrate per hour ) according to model
* = Subject to chemical viscosity and
characteristics, using any usable (non oil base) disinfectant that
fulfils individual specific control requirements. |
|
Timer:
Supplied with
all units
You determine
displacement required for room size |
DRYSAN 9-MINI
Small and
portable
Internal or
External application |
Stainless and
Ceramic
Durability
with most chemical types |
DRYSAN
9-MINI (Inside machine
View)
|
DRYSAN Usage:
Egg holding rooms for the sanitation of breeder eggs
(The practice of fumigation is becoming more restrictive as international
regulating authorities worldwide are prohibiting its usage)
Areas of bio-security concern that treats both
product and contact surfaces with the appropriate chemicals
During transportation [models with ‘inverter’ and
‘anti-splash’]
Humidity control for ‘fine’ dry application
DRYSAN ( other advantages) save up to 90% chemical
application cost - using this very fine and economical method of
application.
Model Selection:
Select the model that will
service your volume requirement within 1 to 2 hours, or less.
Machine volume displacement volume ranging from
30cu to 300cu
M/hour (1,000 to 10,000cu ft/hour), with concentrated
chemical supply rates from
( '*' 0.5 ltr to 5 ltr per hour through the selectable range.
* = Subject to chemical viscosity and
characteristics'.
Some chemicals may require
timing application adjustments (+ / -) subject its properties, and adjusted
according to swab sample.
-
(Suitability for both internal and external applications).
-
''Stainless Steel'' Atomizing system UPDATE and main
machine body to ensure
greater durability
in chemicals PH range selection.
-
ALL MODELS fitted with sealed motor-fan / swivel castors /
timer
End of Application:
Vent the room or allow for
dissipation of chemical [depending on type used].
Daily : Empty and Rinse inside (with clean potable water) to avoid 'film'
or chemical deposit 'buildup' that can effect the efficiency of operation.
Some of the chemicals as
used to date:
VIROCID® usage 20%,
CHLORWASH® usage 12gr/ltr,
QUAT-800® usage 1%,
PARASAFE®,
CLEAKIL-100,
Ambercide
CID 2000 @ 10% (otherwise too corossive)
Hydrogen Peroxide.
MST 'DRYSAN'
machines have been specifically developed to enable an effective and safer
alternative to fumigation with formaldehyde.
''Eggs
were swabbed before and after disinfection with Drysan and 3 different CID Lines
products in comparison to regular formalin fumigation.
The effect on weight loss
during incubation and hatchery results was monitored as well. The overall
impression is that disinfection with Drysan + Virocid 1:5 solution is giving
comparable results with formalin.
If you have a particular chemical that you may wish to use (non oil base)
- Send sample to MST for ''pre usage validation''
sales@MSTegg,com
| 
